Product ID:DEVCON ALUMINUM PUTTY F RESIN
MSDS Date:02/19/1988
FSC:8040
NIIN:00F014914
MSDS Number: BJVTD

Emergency Phone: (508) 777-1100

Info Phone: (508) 777-1100

Cage: 16509

Telephone: 508-777-1100

Cage: 16509

BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN,

CAS: 25068-38-6

RTECS: KD4380000

Fraction By Weight: 10-30%

LD50 LC50 Mixture:ORAL LD50 (RAT): 11.4 G/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: BREATHING DIFFICULTY.
SKIN: IRRITATION. EYES: IRRITATION & SCRATCHED CORNEA. INGESTION:
LOW TOXICITY.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: SENSITIZATION, ITCHING, SWELLING, OR
RASHES. INHALATION: BREATHING DIFFICULTY. INGESTION: LOW TOXICITY.
EYES: IRRITATION & SCRATCHED CORNEA.
Medical Cond Aggravated by Exposure:ALLERGIES, ECZEMA, & OTHER SKIN
DISORDERS

First Aid:EYES: FLUSH W/CLEAN WATER FOR AT LEAST 15 MINS. SKIN: WASH
THOROUGHLY W/SOAP & WARM WATER. INHALATION: REMOVE TO FRESH AIR.
ADMINISTER OXYGEN IF BREATHING IS DIFFICULT. INGESTION: DON'T
INDUCE VOMITIN G. DILUTE W/TWO GLASSES OF WATER. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Flash Point Method:PMCC
Flash Point:>400F
Extinguishing Media:CO2, DRY CHEMICAL, & FOAM
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS & FULL
PROTECTIVE CLOTHING.

Spill Release Procedures:SCRAPE UP & DISCARD IN SUITABLE CONTAINERS
USING INERT ABSORBENT MATERIAL SUCH AS VERMICULITE. WASH AREA
W/INDUSTRIAL CLEANING AGENT. IF SOLVENT IS USED, TAKE CARE AGAINST
OVEREXPOSURE & FIRE.

Handling and Storage Precautions:STORE CLOSED IN COOL, DRY PLACE. AFTER
MIXING W/HARDENER, OBSERVE PRECAUTIONS. AFTER PROPER CURING THE
PRODUCT IS NOT HAZARDOUS.
Other Precautions:AVOID INHALATION WHEN SANDING OR MACHINING THE CURED
MATERIAL & CONTACT W/SKIN.

Respiratory Protection:NONE REQUIRED AT NORMAL HANDLING TEMPERATURES.
Ventilation:USE LOCAL EXHAUST IN CONFINED AREAS & ADEQUATE VENTILATION
FOR NORMAL USE.
Protective Gloves:CHEMICAL RESISTANT RUBBER
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.WASH BEFORE EATING OR SMOKING. DISCARD SHOES & BELTS.
Supplemental Safety and Health

Vapor Pres:0
Vapor Density:>1
Spec Gravity:1.92
pH:7
Evaporation Rate & Reference:(BU AC = 1): <1
Solubility in Water:SLIGHT (0%)
Appearance and Odor:DARK GREY PASTE W/LITTLE ODOR.
Percent Volatiles by Volume:0%

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES, & OXIDIZERS
Stability Condition to Avoid:OPEN FLAME & EXTREME HEAT
Hazardous Decomposition Products:CO, CO2, ALDEHYDES, & ACIDS
Conditions to Avoid Polymerization:HEAT IS RELEASED WHEN RESIN IS MIXED
W/EPOXY HARDENER.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/APPLICABLE STATE &
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.